Skip to main content

Posts

Showing posts from 2014

Set VLAN ID to IPMI Address in Nutanix

The IPMI is remote management interface like as HP iLO, DELL DRAC. During the Nutanix cluster deployment, it is not possible to mention the VLAN ID of the IPMI's IP Address. This need to be entered thru command line via ESXi host or Windows Hyper-V. This article talks about ESXi host only.

Login to ESXi thru SSH client. Run the following command to enter the VLAN ID (we assume that you already configured IP Address)

~ # /ipmitool lan set 1 vlan id 333

~ # /ipmitool lan print1
Set in Progress         : Set Complete Auth Type Support       : NONE MD2 MD5 PASSWORD  Auth Type Enable        : Callback : MD2 MD5 PASSWORD                          : User     : MD2 MD5 PASSWORD                          : Operator : MD2 MD5 PASSWORD                          : Admin    : MD2 MD5 PASSWORD                          : OEM      : MD2 MD5 PASSWORD  IP Address Source       : Static Address IP Address              : xx.xx.xx.xx Subnet Mask             : 255.255.254.0 MAC Address             : xx:xx:xx…