Skip to main content

Set VLAN ID to IPMI Address in Nutanix

The IPMI is remote management interface like as HP iLO, DELL DRAC. During the Nutanix cluster deployment, it is not possible to mention the VLAN ID of the IPMI's IP Address. This need to be entered thru command line via ESXi host or Windows Hyper-V. This article talks about ESXi host only.

Login to ESXi thru SSH client. Run the following command to enter the VLAN ID (we assume that you already configured IP Address)

~ # /ipmitool lan set 1 vlan id 333

~ # /ipmitool lan print1
Set in Progress         : Set Complete
Auth Type Support       : NONE MD2 MD5 PASSWORD 
Auth Type Enable        : Callback : MD2 MD5 PASSWORD 
                        : User     : MD2 MD5 PASSWORD 
                        : Operator : MD2 MD5 PASSWORD 
                        : Admin    : MD2 MD5 PASSWORD 
                        : OEM      : MD2 MD5 PASSWORD 
IP Address Source       : Static Address
IP Address              : xx.xx.xx.xx
Subnet Mask             : 255.255.254.0
MAC Address             : xx:xx:xx:xx:xx:
SNMP Community String   : public
IP Header               : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
BMC ARP Control         : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP      : xx.xx.xx.xx
Default Gateway MAC     : 00:00:00:00:00:00
Backup Gateway IP       : 0.0.0.0
Backup Gateway MAC      : 00:00:00:00:00:00
802.1q VLAN ID          : 333
802.1q VLAN Priority    : 0
RMCP+ Cipher Suites     : 1,2,3,6,7,8,11,12
Cipher Suite Priv Max   : aaaaXXaaaXXaaXX
                        :     X=Cipher Suite Unused
                        :     c=CALLBACK
                        :     u=USER
                        :     o=OPERATOR
                        :     a=ADMIN
                        :     O=OEM

To remove the VLAN ID:

~#ipmitool lan set 1 vlan id off


~ # /ipmitool lan print1
Set in Progress         : Set Complete
Auth Type Support       : NONE MD2 MD5 PASSWORD 
Auth Type Enable        : Callback : MD2 MD5 PASSWORD 
                        : User     : MD2 MD5 PASSWORD 
                        : Operator : MD2 MD5 PASSWORD 
                        : Admin    : MD2 MD5 PASSWORD 
                        : OEM      : MD2 MD5 PASSWORD 
IP Address Source       : Static Address
IP Address              : xx.xx.xx.xx
Subnet Mask             : 255.255.254.0
MAC Address             : xx:xx:xx:xx:xx
SNMP Community String   : public
IP Header               : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
BMC ARP Control         : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP      : xx.xx.xx.xx
Default Gateway MAC     : 
Backup Gateway IP       : 0.0.0.0
Backup Gateway MAC      : 00:00:00:00:00:00
802.1q VLAN ID          : Disabled
802.1q VLAN Priority    : 0

Comments

Popular posts from this blog

vCenter Reinstallation after 60-Days trial expires without losing Database Contents

Many of us still evaluating the vSphere and vCenter in our test environments. Sometimes, it takes more than 60 days to evaluate where trial edition expires.
We can't extend the trial edition in ESX host, either we have to reinstall it or license it. vCenter also have to follow the same way as ESX does. But, here we can keep old database contents as it is when you reinstall the vCenter software.

This document using vCenter 4.0 and SQLEXPRESS 2005 (built in) database. At the time of installation of vCenter 4.0, it installs SQLEXPRESS 2005 by default unless any other Database specified. Mostly, we are using built-in database is SQLEXPRESS 2005 for testing environment.
When you install vCenter 4.0, it installs SQLEXPRESS 2005 and creates a database called "SQLEXP_VIM". You can view this thru SQL Server Configuration Manager console.
Start à All Programs à Microsoft SQL Server 2005 à Configuration Tools à SQL Server Configuration Manager


Creating DSN

Create a System DSN for this d…

Changing Thin to Thick disk and vice-versa

You can change the existing Virtual Hard disks (VMware based) from Thick to thin and vice-versa. This can be achieved by either using VMotion/SVMotion or command line tool called "vmkfstools". Using VMotion/SVMotion is required a valid license. Select “Migrate” and choose “Change Datastore” and select the Disk format.

If you don’t have a VMotion/SVMotion license, use the following command to achieve the same.

From Thick to Thin:

vmkfstools –i "Thickdisk.vmdk" -d thin "Thindisk.vmdk"

It will start to clone to virtual hard disk in Thin Provision method. After completed, you can attach this disk with VM and power it on. If all looks good, you can delete the original thick disk from the data store.

Use the following command to see real-time usage of thin disk:

du –h "Thindisk.vmdk"

You can notice the big difference of disk usage between of Thin and Thick format disks.

From Thin to Thick:

vmkfstools –i "Thindisk.vmdk" -d zeroedthick "Thindisk…